OpenResearchAlpha

Materials Testing · 13 Nov 2026

Comparative investigation of phase formation in Ti–Zr–Cu alloying processes via laser powder-bed fusion and plasma arc melting

Thanawat Phetrattanarangsih-index 0, Pattarapong Wannapraphai, Atchara Khamkongkaeo, Florian Hengsbach, Chedtha Puncreobutr, Gregory B. Olson, Boonrat Lohwongwatanah-index 19

0
Citations
no database records one yet
0
Citations in 2026
so far
19
Leading author's h-index
Boonrat Lohwongwatana, in QAI's scholar index
45
References
works it cites, from open citation data

Citations by database

Each database indexes a different set of journals, preprints and books, so they are shown side by side rather than blended.

  • OpenCitations0
  • Crossref0

Citations per year

The current year is still counting.

  • 2026 so far0

Abstract

Abstract This study presents a comparative analysis of phase formation in a Ti 38 Zr 27 Cu 35 alloy produced via Laser Powder-Bed Fusion (L-PBF) and Plasma Arc Melting (PAM). The investigation evaluates phase constituents, microstructure, elemental distribution, phase formation, and hardness using L-PBF specimens fabricated from in-situ elemental powders and PAM specimens as a reference for the conventional process. Analysis was conducted through FESEM for microstructure, XRD for phase identification, EPMA for chemical quantification, including chemical composition in identified phases, and Vickers testing for hardness. Results indicate that rapid solidification of L-PBF suppressed the predicted primary β -Ti phase, yielding a two-phase microstructure consisting of (Ti, Zr) 2 Cu dendrite and TiZrCu 2 intermetallic phase at the interdendritic. This non-equilibrium state demonstrated reduced lattice parameters and fine-grained structure. In contrast, the slower cooling rate in PAM, at approximately 2–3 orders of magnitude of that of L-PBF, allowed the formation of β phase (Ti-enriched equiaxed dendrites), resulting in β + (Ti, Zr) 2 Cu + TiZrCu 2 three-phase structure consistent with Scheil calculations. Consequently, the L-PBF specimens exhibited higher hardness than PAM. While both methods achieved elemental homogenization, their distinct alloying characteristic and cooling rates resulted in divergent morphological features, phase composition, and mechanical properties, fundamentally influencing the manufacturing.

What the data shows

  • No database records a citation yet, as is usual for a paper this new.
  • Boonrat Lohwongwatana has the highest h-index among the authors (19).

Graph

This paper in the middle, its authors and their most-cited papers below, the papers it cites to the left and the papers citing it to the right. The timeline lays every paper out by year.

Citing paper shares an authorAuthor without a profileSize shows citations, or h-index for authors

Select a node for its details. Drag to pan, scroll to zoom, drag a node to move it.

Start with

Authors (7)

Each author's standing in QAI's scholar index: the works their ORCID iD is attached to, and for anyone whose ORCID record names a lab OpenResearch follows, their arXiv preprints matched by name and a shared co-author. Names are as printed on the paper.

ProfileMost-cited paper

Cited by 0 papers

Who cites this paper, from open citation data, with Crossref's record of each; the 100 newest when there are more.

0 shown
No citing papers for this filter.

References (45)

What it cites, from open citation data, with Crossref's record of each.

Sign in to see 25 more references

A free account opens the rest of the citing papers and references on every paper’s page.